Download The Sample Program To The Processor - ProSoft Technology MVI56-PNPM User Manual

MVI56-PNPM ♦ ControlLogix Platform
Phantom Network Protocol Master Communication Module
1.6

Download the Sample Program to the Processor

To download the sample program from RSLogix 5000 to the
ControlLogix processor:
Note: The key switch on the front of the ControlLogix module must be in the REM
position.
If you are not already online to the processor, open the Communications
1
menu, and then choose Download. RSLogix will establish communication
with the processor.
When communication is established, RSLogix will open a confirmation dialog
2
box. Click the Download button to transfer the sample program to the
processor.
RSLogix will compile the program and transfer it to the processor. This
3
process may take a few minutes.
When the download is complete, RSLogix will open another confirmation
4
dialog box. Click OK to switch the processor from Program mode to Run
mode.
Note: If you receive an error message during these steps, refer to your RSLogix
documentation to interpret and correct the error.
Page 14 of 91
Start Here
ProSoft Technology, Inc.
January 2, 2008