Actual Value F1; Channel - ABB SYN 5201 Operating Instructions Manual

Operating Instructions

Device info: Display of firmware version and IP configuration

Log out / Log in...: Manually activate or de-activate password request
The following five tools can be started via menu or by the related buttons:

Parameter tool

Actual value tool

Transient recorder tool

Event recorder tool

Diagnosis tool
Subsequently the main functions are explained. Further details can be found by the help
function of SynView.
Parameter tool
The parameter tool is used for parameter setting. The parameter values displayed after
starting the tool have been read from a PC file in any case and not from the connected
device. If the values from the device should be displayed, the "Read" button can be
used. The following buttons are available:

Block: blocking SYNCHROTACT 5

Ready: Set SYNCHROTACT 5 to READY; all parameter values in the RAM are
written to the FlashPROM

Write: Transfer all parameter values from the PC to the RAM of SYNCHROTACT 5.

Read: Transfer all parameter values from the RAM of SYNCHROTACT 5 to the PC.

Compare: the settings of the connected SYNCHROTACT 5 are compared with the
settings on the PC screen. Differencies are written to a text file.

Reset Error: Reset an ERROR displayed on the SYNCHROTACT 5.

Indication of selected parameter set
In addition the menu Edit provides the following function:

Copy: all settings are copied into a text file (e.g. to protocol)
Tab on the bottom of the table: selection of the desired parameter set or configurable
IO's or settings of channel 2 (synchrocheck).
Parameters: the parameter sets are divided in 7 groups each. The single parameters
can be hidden or displayed by double click on the name of a parameter group. Minimum,
maximum and default value of a parameter can be displayed in the status toolbar by
click on the related parameter. A double click on a parameter value will open it for
editing. A double click on the parameter name will open a window with setting
recommendations.
abb
ABB Switzerland Ltd
Template: CHIND Techn doc stand, A4 P de, R1.DOT; Filename: 3BHS109762E01 D.doc; Print: 12/6/2011 5:48:00 PM; Save: 12/1/2011 2:37:00 PM; CHIND No. 3BHS109763 ZAB D14 Rev. -; I-Q
Document No Art Part
3BHS109762 E01
SYN 5201/SYN 5202
Language Revision page
en D 85