ABB SYN 5201 Operating Instructions Manual page 73

Operating Instructions SYN 5201/SYN 5202
With the conventional control, a configurable input can be used for external reset
Note
function. As a condition, a device with 7 parameter sets has to be used and as a result,
a maximum of 6 parameter sets can be used only. With the operating interface, no
physical input is required, i.e., a device with one parameter set is enough for the
external reset and in case of 7 parameter sets there are no restrictions.
Document No Art Part Language Revision page
abb
3BHS109762 E01 en D 73
ABB Switzerland Ltd
Template: CHIND Techn doc stand, A4 P de, R1.DOT; Filename: 3BHS109762E01 D.doc; Print: 12/6/2011 5:48:00 PM; Save: 12/1/2011 2:37:00 PM; CHIND No. 3BHS109763 ZAB D14 Rev. -; I-Q