Installation And Disposal; Abb Abb Switzerland Ltd - ABB SYN 5201 Operating Instructions Manual

Operating Instructions
6

Installation and disposal

SYNCHROTACT 5 devices operate with in some cases dangerous voltages (>50 V),
e.g. measuring inputs up to 170 VAC and relay outputs up to 250 VAC/VDC.
Manipulations carried out on these parts can cause death or injury to the persons
involved or damage to surrounding objects. If handled correctly and in the proper
environment, as described in these instructions, there is no risk.
All relevant regulations must be observed during installation. It is essential that these
safety regulations are read before starting any work on the SYNCHROTACT 5
equipment.
The safe operation of the device requires appropriate transport and proper storage,
Caution
erection and installation.
The equipment should be unpacked with the usual degree of care, without the use of
force and using suitable tools.
The device should be checked visually for any damage caused during transport. Any
complaints of defects caused by improper transport should be addressed immediately to
the receiving station or the last carrier.
Only interior rooms which are dry and dust-free and which contain no gases, acid fumes
or similar are suitable as sites for installation.
6.1 Diagram of dimensions
abb
ABB Switzerland Ltd
Template: CHIND Techn doc stand, A4 P de, R1.DOT; Filename: 3BHS109762E01 D.doc; Print: 12/6/2011 5:48:00 PM; Save: 12/1/2011 2:37:00 PM; CHIND No. 3BHS109763 ZAB D14 Rev. -; I-Q
®
Document No Art Part
3BHS109762 E01
SYN 5201/SYN 5202
Language Revision page
en D 77