Setup And Configuration; Checklist - HPE Edgeline EL300 Setup And Configuration Manual

Setup and configuration

Checklist

Complete this checklist to set up, install, and configure your new HPE Edgeline EL300 Converged Edge System.
1. Unbox the system and identify the components.
2. Verify that the intended installation site conforms to space, airflow, temperature, and power requirements.
3.
Install applicable hardware options:
• Power adapter
• 8 GB SD card kit
SFF to M.2 drive cage kit
•
SATA/M.2 drive
•
4. Install wireless network kits and antennas:
HPE EL Network WiFi card
•
WiFi antenna
•
• HPE EL Network LTE card
• LTE antenna
5.
Mount the system:
• Wall mounting
• DIN rail mounting
Base only bracket kit
•
Standard bracket kit
•
6. Prepare to configure the system:
a. Verify OS support.
b. Gather OS installation media and necessary keys.
c. Verify network connectivity.
d. Plan for network address.
7. Connect to the iSM and configure the system using one of the available methods:
Connect using the WiFi Access Point.
•
Connect to the iSM web interface.
•
• Connect to the iSM CLI using serial cable.
8. Complete the system network configuration and install an OS.
Setup and configuration 9