Standard Bracket Option Kit - HPE Edgeline EL300 Setup And Configuration Manual

3. Install the cable management bracket.
The installation is complete.

Standard bracket option kit

The HPE Edgeline EL300 Converged Edge System can be connected to additional expansion units for increased functionality
and connectivity options. The standard bracket option is installed when additional expansion board support is required.
The standard bracket option can be installed to support the following hardware configurations:
• HPE Edgeline EL300 base unit
• HPE Edgeline EL300 base unit + 1 expansion unit
• HPE Edgeline EL300 base unit + 2 expansion units
The following components are available with the option kit:
• Standard bracket panels (2)
• T-15 screws
• Bracket handles
• Cable management bracket
• Reusable cable ties and velcro
38 System mount options