Components And Site Requirements; Component Identification; Hpe Edgeline El300 Converged Edge System Configurations; Front Panel Component - HPE Edgeline EL300 Setup And Configuration Manual
Converged edge system
Hide thumbs
Also See for Edgeline EL300:
- Getting started manual (36 pages) ,
- Maintenance and service manual (57 pages) ,
- Product end-of-life disassembly instructions (3 pages)
Table of Contents
Advertisement
Components and site requirements
In this chapter, you can find the following:
•
Component identification
•
System installation site requirements
Component identification
This chapter describes the external and internal server features and components.
HPE Edgeline EL300 Converged Edge System configurations
The HPE Edgeline EL300 Converged Edge System is available in the following configurations for 9-36 VDC and 12 VDC power
supply options:
•
HPE Edgeline EL300 Converged Edge System with no daughter card.
•
HPE Edgeline EL300 Converged Edge System with 4 ports 1GBE Ethernet with TSN support daughter card.
•
HPE Edgeline EL300 Converged Edge System with 2 ports RS232/422/485 opto isolated daughter card.
•
HPE Edgeline EL300 Converged Edge System with 2 ports CAN Bus A/B/FD 2.0 opto isolated daughter card.
•
HPE Edgeline EL300 Converged Edge System with 8 Bits Configurable GPIO daughter card.
For information on the daughter cards, see the HPE Edgeline EL300 Daughter Card Getting Started Guide on www.hpe.com/
support/EL300-DaughterCard-GSG-en.
Front panel component
Item
1
Description
Top cover
Components and site requirements
11
Hide quick links:
Advertisement
Table of Contents
