Din Rail Mounting Panel Option Kit; Installing The Rail Mounting Kit - HPE Edgeline EL300 Setup And Configuration Manual

The installation is complete.

DIN rail mounting panel option kit

The DIN rail mounting panel option is required when mounting the system on a DIN rail.

Installing the rail mounting kit

Prerequisites
Before you perform this procedure:
• Make sure that the preferred bracket option is installed on the HPE Edgeline EL300 system.
• Make sure that you have the T-15 security screwdriver available.
Procedure
1. Attach the DIN rail clips to the DIN mounting panel:
a. Align the rail clips to the DIN panel.
b. Install the screws.
For two-rail option loosely install the clips for the lower rail.
• Single rail
42 System mount options