Static Ipv4 Address Configuration Settings; Configuring Ipv6 Settings; Ipv6 Configuration Settings - HPE Edgeline EL300 Setup And Configuration Manual

Static IPv4 Address Configuration settings

IPv4 Address
The iSM IP address. The IP address is supplied automatically when DHCP is enabled. When DHCP is not enabled, enter a
static IP address.
IPv4 Subnet Mask
The subnet mask of the IP network. The subnet mask is supplied automatically when DHCP is enabled. When DHCP is not
enabled, enter a subnet mask for the network.
IPv4 Gateway
The iSM gateway IP address. The iSM gateway IP address is supplied automatically when DHCP is enabled. When DHCP is
not enabled, enter an IP address for the gateway.
IPv4 DNS Configuration settings
Primary DNS Server
This value is supplied automatically when DHCP is enabled. If you are using a static IP address, no name servers are used.
Secondary DNS Server
This value is supplied automatically when DHCP is enabled. If you are using a static IP address, no name servers are used.
Tertiary DNS Server
This value is supplied automatically when DHCP is enabled. If you are using a static IP address, no name servers are used.

Configuring IPv6 settings

Prerequisites
iSM Admin privilege
Procedure
1. Click Wired and Wireless Network in the navigation tree.
2. Click the IPv6 tab.
3. Configure the Global IPv6 Configuration setting.
4. Configure the IPv6 Configuration settings.
5. Configure the DNS Configuration settings.
6. To save the changes you made on the IPv6 Settings page, click Apply.
7. If you are finished configuring the iSM network settings, restart iSM.
It might take several minutes before you can re-establish a connection.

IPv6 Configuration settings

Global IPv6 Configuration
iSM Client Applications use IPv6 first
When both IPv4 and IPv6 service addresses are configured for iSM client applications, this option specifies which protocol
iSM tries first when it accesses a client application. This setting also applies to lists of addresses received from the name
resolver when using FQDNs to configure NTP.
68 Configuration