Sff To M.2 Adapter Option; Installing The Sff To M.2 Adapter Option - HPE Edgeline EL300 Setup And Configuration Manual

The installation is complete.

SFF to M.2 adapter option

The SFF to M.2 adapter option is required for installing an additional SATA M.2 SSD in the HPE Edgeline EL300 Converged
Edge System.

Installing the SFF to M.2 adapter option

Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• T-15 security screwdriver
• Phillips screwdriver
• M.2 SSD module
• Hex nut screwdriver
Procedure
1. Power down the system.
2. Remove all power:
a. Disconnect the power cord from the power source.
b. Disconnect the power cord from the system.
3. Depending on the surface the system is installed on, do one of the following:
a. Dismount the system from wall.
b. Dismount the system from the rails.
4. Remove the security cover.
22 Hardware options installation