Adding Components To The Ism Repository; Installing A Component From The Ism Repository; Boot Order; Configuring The System Boot Order - HPE Edgeline EL300 Setup And Configuration Manual

Adding components to the iSM Repository

Procedure
1. Click Firmware in the navigation tree, and then click Upload to Repository in the right pane.
2. Select the Local file or Remote file option.
3. Depending on the option you selected, do one of the following:
a. In the File box, click Browse (Internet Explorer, Edge, or Firefox) or Choose File (Chrome), and then specify the location
of the firmware component.
b. In the URL box, enter the URL for a firmware component on an accessible web server.
4. Click Upload.
The file is uploaded to the repository and displayed in the repository contents list.

Installing a component from the iSM Repository

You can install new firmware from the iSM Repository page.
Procedure
1. Click Firmware in the navigation tree, and then click Repository.
2. Click the install component icon
3. Click Yes, install now.
The update begins immediately.

Boot order

The System Boot Order feature enables you to set the system boot device priority.
Changes made to the boot order might require a system reset.
An error occurs if you try to change the system boot order when the system is in POST. You cannot modify the boot order
during POST. If this error occurs, wait for POST to finish, and then try again.

Configuring the system boot order

Procedure
1. Click Administration in the navigation tree, and then click the Boot Order tab.
2. (Optional) Use the controls to add or remove Devices Supported to or from the Boot Order list.
a. To add a boot device to the Boot Order list, select a boot device in the Devices Supported list and then click Select.
b. To remove an item from the Boot Order list, select a boot device and then click Remove.
3. To move a device up or down in the boot order, select the device in the Boot Order list, and then click Up or Down.
4. Click Apply.
The system confirms that the boot order was updated successfully.
next to the component you want to install.
Configuration 73