4.
Install the drive cage cover.
5.
Install the security cover.
6.
Install the LTE antennas.
7.
Do one of the following:
•
Mount the system on wall.
Mount the system on rails.
•
8.
Connect the power cord to the system.
9.
Connect the power cord to the power source.
10. Power up the system.
Installing the LTE antennas
Prerequisites
Before you perform this procedure:
Make sure that the bracket option is installed on the HPE Edgeline EL300 system.
•
.
•
Make sure that you have the T-15 security screwdriver available.
Procedure
1. Locate the correct antenna slot.
2. Install the antenna.
The antenna shown in the image might look different from the antenna for your system.
Wireless network kit and antenna installation
35