Configuring The Internet Explorer Javascript Setting; Logging In To The Ism Web Interface - HPE Edgeline EL300 Setup And Configuration Manual

Pop-up windows—Pop-up windows must be enabled for certain features to function correctly. Verify that pop-up blockers
•
are disabled.
TLS—To access the iSM web interface, you must enable TLS 1.0 or later in your browser.
•
Supported browsers
iSM supports the latest versions of the following browsers:
• Microsoft Edge
• Mozilla Firefox
• Google Chrome mobile and desktop
• Microsoft Internet Explorer 11

Configuring the Internet Explorer JavaScript setting

Some versions of Internet Explorer have JavaScript disabled by default. Use the following procedure to enable JavaScript.
Procedure
1. Start Internet Explorer.
2. Select Tools > Internet options.
3. Click Security.
4. Click Custom level.
5. In the Scripting section, set Active scripting to Enable.
6. Click OK.
7. Refresh your browser window.

Logging in to the iSM web interface

Procedure
1. Enter https://<iSM host name or IP address>
When you access the iSM web interface, you must use HTTPS (HTTP exchanged over an SSL encrypted session).
The iSM login page opens. If a login security banner is configured, the banner text is displayed above the login section.
2. Enter a local account Username and Password, and then click Log In.
TIP: When logging in to the iSM web interface for the first time:
• The default username is iot. The username is case sensitive.
• The default password is printed on the label attached to the chassis.
62 Configuration