Viewing Installed Firmware Information; Firmware Types; Firmware Details; Updating Firmware - HPE Edgeline EL300 Setup And Configuration Manual

A page displays showing the connection options for the cellular modem. Connect automatically is selected by default. The
system is now connected to cellular broadband.
4. Verify the connection by pinging a responsive server.

Viewing installed firmware information

Procedure
Click Firmware in the navigation tree.
The Firmware page displays firmware information for various system components. If the system is powered off, the
information on this page is current as of the last power off. Firmware information is updated only when the system is powered
on and POST is complete.

Firmware types

The firmware types listed on the Firmware page vary based on the system configuration.
For most configurations, the system BIOS, CPLD, and iSM firmware and base image are listed.

Firmware details

The Firmware page displays the following information for each listed firmware type:
• Firmware name -The category name of the firmware.
• Firmware version -The currently installed version number of the firmware.

Updating firmware

While firmware can be updated using components uploaded to the iSM Repository, you can also update firmware directly.
Prerequisites
iSM Admin privilege.
Procedure
1. Click Firmware in the navigation tree, and then click Update Firmware in the right pane.
2. Select the Local file or Remote file option.
3. Depending on the option you selected, do one of the following:
a. In the File box, click Browse (Internet Explorer, Edge, or Firefox) or Choose File (Chrome), and then specify the location
of the firmware component.
b. In the URL box, enter the URL for a firmware component on an accessible web server.
4. Click Flash.
The firmware update status will be visible in the event log.
72 Configuration