To Originate A Call Using Speed Calling (One-Touch Speed Calling Keys) - NEC Dterm Series i User Manual

To Originate a Call Using Speed Calling (One-touch Speed Calling keys)

Press the desired One-Touch Speed Calling key, or press Speaker and One-Touch Speed Calling key.
To program
term
(Available only on D
Press Feature button.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access code on the keypad.
Display indicates the digits dialed.
Press Feature again to save the number.
term
To verify with D
Press Feature button.
Press desired One-Touch Speed Calling key.
Display indicates digits programmed.
Note 1: To program a hook switch for transfer or feature activation, press Recall key as first digit. (! displays on LCD.)
Note 2: To program a pause, press the Recall key as any digit other than the first digit. (– displays on LCD.)
Note 3: To program a Voice Call, press Transfer key after dialing station number. (V displays on LCD.)
Note 4: One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a feature key by storing the NEAX2400 IPX feature access code.
The features may be programmed on a system basis by the Telephony Server Admin.
Access codes may be stored in conjunction with telephone numbers. For example, one button can be pro-
grammed by the user to transfer to a certain extension.
stations with One-Touch Speed Calling keys.)
4D/8D/16D/16LD/32D
– 37 –
SPEED SET
4:26 PM TUE 13 APR 2004