Abbreviated (Speed) Dialing <For Outside; One-Touch / Dss Call; Abbreviated Speed Dialing For Outside Call - NEC SL2100 User Manual

SL2100 DT920 (ITK-8LCX) User Guide
4.2.4 Abbreviated (Speed) Dialing <for Outside>
Figure 18 Abbreviated Speed Dialing for Outside Call
The digit of Bin No. depends on the system setting. (0-9 <Only Group

ABB> / 00-99 / 000-999)
Telephone Numbers should be pre-registered to the system.

System setting is necessary for Group ABB function. Ask your NEC

Authorized Supplier for the details.
When you assign the Common ABB Key on the Programmable

Function Key, Press HOLD is required after dialing the Function
Code27.
4.2.5

One-Touch / DSS Call

Figure 19 One-Touch / DSS Call
Telephone / Extension number should be pre-registered to a One-

Touch / DSS Key.
Trunk Access Code should be added in front of the Telephone

number.
Issue 1.0
19