Dnd/Mw Lamp Control - NEC NEAX2400 IMX Features Manual

D-151
D-151
General Description
This service allows the Message Waiting Lamp to be controlled by setting/cancelling DO NOT DISTURB [D-11]
service. The Message Waiting Lamp will either light or flash to distinguish which of the services (MESSAGE
WAITING [M-6] or DO NOT DISTURB [D-11]) is being activated.
Operating Procedure
Refer to the operating procedures of MESSAGE WAITING [M-6] and DO NOT DISTURB [D-11].
Service Conditions
1. Whether to control the Message Waiting Lamp by DO NOT DISTURB [D-11] or MESSAGE WAITING
[M-6] service can be selected in the system.
2. The Message Waiting Lamp may be controlled to light or flash for DO NOT DISTURB [D-11] service.
3. The Message Waiting Lamp may be controlled to light or flash for MESSAGE WAITING [M-6] service.
4. When the Message Waiting Lamp is controlled by both DO NOT DISTURB [D-11] AND MESSAGE
WAITING [M-6] service, control by MESSAGE WAITING [M-6] service has priority.
5. The Message Waiting Lamp control is not available during predetermined Do Not Disturb mode.
6. The Message Waiting Lamp requires a PA-16LCBE circuit card.
Page 76

DND/MW Lamp Control

DND/MW Lamp Control
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2