Spectrum Settings (Dad Only) - Agilent Technologies 1260 Infinity G1315C User Manual

4
Using the Detector
Special Settings of the Detector

Spectrum Settings (DAD only)

To change the Spectra settings open.
1 To change the Spectra settings select Setup Detector Signals.
2 In the section Spectrum click on the drop-down list and chose a parameter.
3 Change the Range, Step width and Threshold according to your needs.
86
Table 13 on page 87 shows the possible parameters.
Figure 28 Spectra Settings
Agilent 1260 Infinity DAD and MWD User Manual