Array Site Angle Setting - L-Acoustics KARA MODULAR WST SYSTEM Rigging Procedures

® ® ® ®
KARA KARA
KARA KARA
M M M M O O O O DULAR DULAR DULAR WST DULAR
rigging procedures using rigging procedures using rigging procedures using rigging procedures using
VERSION 1.0
9.3.2

Array site angle setting

The site angle of the stacked KARA array will be determined by the angle of the bottom enclosure in the range from
-15° to +5°. Install both KARA-ANGARMEX angle arm extensions to obtain angles from -7.5° to -15°. Table 7 indicates
all possible site angles settings:
Angle selection on KARA
(angle label facing the cursor)
0°
1°
2°
3°
4°
5°
7.5°
10°
+5°
Figure 73: Bottom KARA angle selection without KARA-ANGARMEX
Figure 74: Bottom KARA angle selection with KARA-ANGARMEX
KARA_SRM_EN_1-0
® ® ® ®
WST WST WST SYSTEM SYSTEM SYSTEM SYSTEM
kara- - - - minibu kara
kara kara
Table 7: Possible site angles for stacked array
Resulting site angle without KARA-
ANGARMEX (Figure 73)
0°
10°
w w w . l - a c o u s t i c s . c o m
minibu
minibu minibu
-5°
-4°
-3°
-2°
-1°
0°
+2.5°
+5°
5°
-5°
Resulting site angle with KARA-
ANGARMEX (Figure 74)
-15°
-14°
-13°
-12°
-11°
-10°
-7.5°
—
0°
68 68 68 68