Kara-Minibu Site Angle Setting - L-Acoustics KARA MODULAR WST SYSTEM Rigging Procedures

9.2.2

KARA-MINIBU site angle setting

The KARA-MINIBU site angle setting will be discrete or continuous depending on the chosen rigging option.
Rigging options 1 and 3 offer 17 discrete site angle values in each configuration by selecting the single shackle position
(holes 1-17). The hole numbering convention is shown in Figure 67 for KARA-MINIBU and Figure 68 for KARA-
MINIBU/KARA-MINIBUEX.
For rigging options 1 and 3 the bumper site angle will also depend on the size and shape of the array
(number of enclosures and inter-enclosure angles). Refer to SOUNDVISION Software [3.4] for site
angle calculation.
IMPORTANT
Note: Hole 15 provides 0° site angle for an SB18 standalone array.
Front
Figure 67: Rigging hole numbering convention for KARA-MINIBU
1
Front
Figure 68: Rigging hole numbering convention for KARA-MINIBU/KARA-MINIBUEX
KARA_SRM_EN_1-0
2 3 4 5 6 7
1
Rear extension configuration
17
Front extension configuration
w w w . l - a c o u s t i c s . c o m
9 10 11 12 13 14 15 16
8
17
17
Rear
1
Rear
65 65 65 65