Array Disassembling Procedure - L-Acoustics KARA MODULAR WST SYSTEM Rigging Procedures

® ® ® ®
KARA KARA
KARA KARA
M M M M O O O O DULAR DULAR DULAR DULAR WST
rigging procedures using rigging procedures using rigging procedures using rigging procedures using
VERSION 1.0
6.4.3

Array disassembling procedure

All along the procedure:
STRICTLY follow the sequence of the successive steps.
SYSTEMATICALLY verify that each BLP is fully inserted.
WARNING
For clarity purposes the loudspeaker cables removal procedure will not be described.
The loudspeaker cables will not be represented in the figures.
CAUTION
1. Detach the ratchet strap or other equivalent material from the stacked array.
2. Bring an empty KARA flight-case to the rigging location and remove the lid.
3. Separate the top KARA (KARA#3 for example) from the array by removing the four KARA#2 top R-BLP from
their link holes and re-inserting them into their storage holes.
KARA_SRM_EN_1-0
® ® ® ®
WST WST WST SYSTEM SYSTEM SYSTEM SYSTEM
kara- - - - minibu kara minibu
kara kara minibu minibu
KARA#3
KARA#2
KARA#1
SB18#2
SB18#1
Figure 57: Separating KARA#3 from KARA#2
w w w . l - a c o u s t i c s . c o m
52 52 52 52