Flown Array Options And Site Angle Setting; Kara-Minibu Rigging Options - L-Acoustics KARA MODULAR WST SYSTEM Rigging Procedures

® ® ® ®
KARA KARA
KARA KARA
M M M M O O O O DULAR DULAR DULAR DULAR WST
rigging procedures using rigging procedures using rigging procedures using rigging procedures using
VERSION 1.0
9.2

Flown array options and site angle setting

9.2.1

KARA-MINIBU rigging options

®
L-ACOUSTICS recommends 4 different rigging options to fly the KARA-MINIBU for arrays containing KARA and/or
SB18 enclosures. It is possible to use 1 or 2 hang points and to include the KARA-MINIBUEX accessories (see Figure
66).
ALWAYS refer to the mechanical data and warning indications provided in SOUNDVISION Software
(Mechanical Data section) [3.4] to verify the mechanical conformity of the loudspeaker assembly before
installation.
WARNING
Front
KARA_SRM_EN_1-0
® ® ® ®
WST WST WST SYSTEM SYSTEM SYSTEM SYSTEM
kara- - - - minibu kara minibu
kara kara minibu minibu
Rear
Figure 66: KARA-MINIBU rigging options
w w w . l - a c o u s t i c s . c o m
Option 1: KARA-MINIBU, 1 point
• KARA standalone array
• 1 motor
• Variable position [9.2.2]
Option 2: KARA-MINIBU, 2 points
• KARA standalone array
• 2 motors
• Fixed front and rear positions [9.2.2]
(spacing = 407 mm/16 inch)
Option 3: KARA-MINIBU, KARA-
MINIBUEX, 1 point
• SB18/KARA mixed array or SB18
standalone array
• 1 motor
• Variable position [9.2.2]
• Left view = Rear extension config.
Right view = Front extension config.
Option 4: KARA-MINIBU, KARA-
MINIBUEX, 2 points
• SB18/KARA mixed array or SB18
standalone array
• 2 motors
• Fixed front and rear positions [9.2.2]
(spacing = 407 mm/16 inch)
• Left view = Rear extension config.
Right view = Front extension config.
64 64 64 64