® ® ® ®
KARA
KARA
KARA
KARA
M M M M O O O O DULAR
DULAR
DULAR
DULAR WST
rigging procedures using
rigging procedures using
rigging procedures using
rigging procedures using
VERSION 1.0
5 5 5 5
K K K K ARA
ARA
RIGGING COMPONENTS
RIGGING COMPONENTS
ARA
ARA
RIGGING COMPONENTS
RIGGING COMPONENTS
® ® ® ®
5.1
KARA-MINIBU
®
The L-ACOUSTICS
KARA-MINIBU rigging structure has been designed to fly or stack the KARA
variable-curvature, vertical line source array. KARA-MINIBU also allows KARA to be attached to an SB18 subwoofer
array.
Note: KARA-MINIBU also can fly straight vertical SB18 arrays.
The KARA-MINIBU is a rectangular frame fitted with the following elements:
•
Four 5/16" R-BLP (round-shaped ball-locking pins) for KARA rigging.
•
One laser support plate with four bolts for optional TEQSAS
mounting. The LAP-TEQ is part of the L-ACOUSTICS
TOOLCASE Product spec sheet [3.4]).
•
Two shackles fitted with 12 mm/0.47 inch-diameter bolts and safety pins.
•
17 shackle holes for rigging.
•
2 shackle holes for pullback configurations.
Note: Refer to [9.2.1] for distance between shackles.
KARA_SRM_EN_1-0
® ® ® ®
WST
WST
WST
SYSTEM
SYSTEM
SYSTEM
SYSTEM
kara- - - - minibu
kara
minibu
kara
kara
minibu
minibu
Shackle (x2)
R-BLP (x4)
Laser support plate
Figure 3: KARA-MINIBU rigging structure
w w w . l - a c o u s t i c s . c o m
®
LAP-TEQ laser/inclinometer device
®
TECH TOOLCASE (refer to the TECH
Rigging holes (x17)
Pullback hole (x2)
®
enclosures as a
8 8 8 8