Kara-Pullback; Flight-Case - L-Acoustics KARA MODULAR WST SYSTEM Rigging Procedures

® ® ® ®
KARA KARA
KARA KARA
M M M M O O O O DULAR DULAR DULAR DULAR WST
rigging procedures using rigging procedures using rigging procedures using rigging procedures using
VERSION 1.0
5.3

KARA-PULLBACK

®
The L-ACOUSTICS KARA-PULLBACK rigging
accessory will allow setting the KARA array in a
pullback configuration. It attaches to the bottom
enclosure of the array and to the hook or stinger of
an additional motor.
The KARA-PULLBACK is a plate on which is
attached one shackle fitted with 19 mm/0.75 inch-
diameter bolt and a safety pin.
5.4

Flight-case

It is recommended to use a flight-case designed to ship a 3-KARA vertical array. It should contain foam inserts to
prevent array movement and the tray should be fitted with 2 wedges to keep the array vertical.
Complete flight-case
KARA_SRM_EN_1-0
® ® ® ®
WST WST WST SYSTEM SYSTEM SYSTEM SYSTEM
kara- - - - minibu kara minibu
kara kara minibu minibu
Shackle
Figure 5: KARA-PULLBACK rigging accessory
Figure 6: Recommended flight-case for KARA
w w w . l - a c o u s t i c s . c o m
Tray supporting a 3-KARA array
Wedges
Tray detail
10 10 10 10