Beckman Coulter Avanti J-HC Instructions For Use Manual page 37

•
If you enter a value out of the achievable g-seconds range for that rotor, a message prompts
you to enter a different value.
4
Press the next function key or press
• The centrifuge begins calculating and displaying the accumulated force.
• Deceleration begins when the set g-seconds value is reached.
• During deceleration, the red indicator light on the
• The g-seconds continue to accumulate until the rotor stops spinning, so set and actual
g-seconds values may be different at the end of the run.
Entering a Continuous (Hold) Run
1
Press TIME
The HH:MM
2
Press the
HOLD appears in the
PN J3HC-IM-5AD
.
, G-SEC, and HOLD soft keys appear.
HOLD
soft key to select the hold mode.
Time: field.
Rotor : JS-5.0
Speed : 5.000 RPM = 0 x G
Time : 00:00
Temp : 25 Max Temp : 29
Accel : MAX Decel : MAX
ENTER START
then .
STOP
key flashes.
HR:MIN
HOLD
HH:MM
G-SEC
HOLD
2
Operation
Manual Operation
2-9