Connecting To Your Vehicle - Intrepid Control Systems neoVI Hardware Help

Intrepid Hardware Help

Connecting to Your Vehicle

Vehicle Connector - OBD Pin-out
Main
A pplies to
neoVI Blue, neoVI Red, neoVI FIRE, neoVI Yellow, and ValueCA N
The O BD-II / J1962 connector is present on every north Am erican vehicle since 1996. The connector, defined in the J1962 specification, allows you to connect to the vehicle's network system . This connector is usually found
under the dash board (figure 1).
Figure 1 - The J1962 Connector is usually located under the dash board. Here we show the connector on a 1999 GM Saturn SL.
The device pin-out depends on the type of hardware you are connecting and the cable you have. To see the pin-out for your hardware select your hardware type below.
- ValueCAN3
- neoVI Blue
- neoVI RED \ neoVI FIRE
- neoVI Yellow
neoVI Documentation - (C) Copyright 2000-2019 Intrepid Control Systems, Inc.
Last Update: Thursday, July 09, 2009
5 / 71