Getting Started - Intrepid Control Systems neoVI Hardware Help

Intrepid Hardware Help

Getting Started

Main
Installing Software and Configuration Tools
The first step to using the API, is installing the needed drivers and dlls. This can be done in a few different ways. Installing Vehicle Spy 3 (full and free version) or the API install kit found
on the CD that shipped with the hardware will take care of this step. Software can also be found on
From the CD that shipped with the unit, run the icsAutoPlay.exe from the root of the disc (if it does not start automatically). This will give you the option of installing Vehicle Spy 3 or the
API install kit. From the Website, the following links will have the latest software.
-Vehicle Spy 3 Trial includes everything in the API install kit and has Vehicle Spy 3 Trial.
-API install kit for RP1210, J2534, and Intrepid Controls Systems' API.
Installing the neoVI device on USB
Next, verify that you have the following minimum system requirements:
One free USB port
Windows XP (SP3), Vista, 7, 8, 8.1, or 10 (Windows RT is not supported)
If Vehicle Spy 3 is installed, the hardware drivers are also installed. W hen a device is plugged in, W indows should recognize it and finish the driver install.
Installation Support
If you have any problems installing neoVI or ValueCAN devices, please call Intrepid Control Systems, Inc. at 810-731-7950.
Vehicle Connections
neoVI and ValueCAN devices include a copy of their pinouts on the device.
A dditional Information
Please review the following sources for more information on the neoVI vehicle interface.
Description
neoVI O nline Docum entation
neoVI Website
Vehicle Spy 3 website
neoVI Documentation - (C) Copyright 2000-2019 Intrepid Control Systems, Inc.
Last Update: Tuesday, May 31, 2016
support page of Intrepid Control Systems
Also, please see the neoVI user documentation.
Location
Installed with neoVI Ex plorer
http://www.intrepidcs.com /neovi/
http://www.intrepidcs.com /vspy/
Getting Started
Website.
2 / 71