Overview - Intrepid Control Systems neoVI Hardware Help

Intrepid Hardware Help

Overview

Hardware Overview
Main
neoVI and ValueCAN hardware from Intrepid Control System s offer a way to interface your PC to a variety of different network s com m only used in today's vehicles. Using neoVI or ValueCAN devices, you can m onitor a num ber
of different network s sim ultaneously.
Most neoVI devices connect to the vehicle through a 25 pin DSUB connector while ValueCAN devices connect through a 9 pin DSUB connector. neoVI and ValueCAN devices can sim ultaneously read and transm it m essages on all
of its connected network s, tim e-stam p events, and transfer the m essages to the PC.
Hardware configuration can be done in Vehicle Spy or through the use of a hardware ex plorer. The hardware ex plorers allows you to setup baud rates, enable/disable network s and control device behavior.
Figure 1 - Intrepid Control System's Vehicle Interfaces.
neoVI Documentation - (C) Copyright 2000-2019 Intrepid Control Systems, Inc.
Last Update: Tuesday, January 17, 2012
1 / 71