Configuration - Dahua PFS4218-16GT-190 Web Config Manual

Step 2 Click Activate Alternate Image.
The device reboots. After reboot, the Alternate Image changes to be the Active Image,
and the Active Image changes to be the Alternate Image.

4.4.4 Configuration

4.4.4.1 Save startup-config
You can save all the current configuration of the switch.
Step 1 Select Advanced > Maintenance > Configuration> Save startup-config.
The Save Running Configuration to startup-config interface is displayed. See Figure
4-129.
Step 2 Click Save Configuration.
4.4.4.2 Download
You can download the configuration file.
Step 1 Select Advanced > Maintenance > Configuration> Download.
The Download Configuration interface is displayed. See Figure 4-130.
Step 2 Select the configuration file to download. There are three types:
 running-config: currently running configuration file. It is valid at the moment and will
be lost if power off.
default-config: the default configuration.

startup-config: the configuration running when the switch starts up. It can be saved

when power off.
Step 3 Click Download Configuration.
4.4.4.3 Upload
You can upload the configuration file.
Step 1 Select Advanced > Maintenance > Configuration > Upload.
The Upload Configuration interface is displayed. See Figure 4-131 .
Figure 4-129 Save running configuration to startup-config
Figure 4-130 Download configuration
Advanced Settings 78