Aggregation - Dahua PFS4218-16GT-190 Web Config Manual

Step 2 Select Enable Loop Protection as Enabled to enable the function. You can set the
Transmission Time and the Shutdown Time.
Step 3 Set the parameters in Port Configuration, including Enabled, Action, and Tx Mode.
Step 4 Click Save.

4.1.5 Aggregation

Aggregation is to form the multiple physical ports of the switch into the logical port. The multiple
links in the same group can be regarded as a logical link with the larger bandwidth.
Through aggregation, the ports in the same group can share the communication flow, to make a
larger bandwidth. Besides, the ports in the same group can back up reciprocally and
dynamically, to enhance the link reliability.
Figure 4-58 Loop protection
Advanced Settings 41