Dahua PFS4218-16GT-190 Web Config Manual page 43

Step 2 Select the Mode as Enabled in ARP Inspection Configuration to enable ARP inspection
function.
Step 3 Set the parameters. See Table 4-12.
Parameter
Translate dynamic to
static
Port Mode Configuration
Step 4 Click Save.
Figure 4-49 Port configuration
Table 4-12 ARP inspection parameter
Description
Click the button to switch dynamic/static.
Mode: Disabled and Enabled are selectable.
Check VLAN: Disabled and Enabled are selectable.
Logy Type: None, Deny, Permit, and All are selectable.
Advanced Settings 36