LLDPDU (Link Layer Discovery Protocol Data Unit) to release to the neighbors connected to
itself directly. The neighbors receive the information, and save it in standard MIB (Management
Information Base) format, for the network management system to quiry and judge the link
communication status.
LLDP
Step 1
Select Advanced > Configuration > LLDP.
The LLDP Configuration interface is displayed. See Figure 4-70.
Step 2
Set the parameters including Tx Interval, Tx Hold, Tx Delay, and Tx Reinit in LLDP
Parameters.
Step 3
Set the parameters including Mode, CDP aware, Trap, and son on in LLDP Interface
Configuration.
Step 4
Click Save.
LLDP-MED
Figure 4-70
LLDP configuration
Advanced Settings 52