Step 3
Set the parameters. See Table 4-8.
Parameter
Security Mode
Security Name
Group Name
Step 4
Click Save.
Views
After SNMP views configured, you can specify the SNMP views for the SNMP group to limit the
MIB target that the SNMP group can visit.
Step 1
Select Advanced > Configuration > Security > SNMP > Views.
The Views interface is displayed. See Figure 4-34.
Step 2
Click Add New Entry.
A new record is added. See Figure 4-35.
Step 3
Set the parameters. See Table 4-9.
Parameter
View Name
Figure 4-33
Add a group
Table 4-8 Group parameter
Description
Select the security mode from the drop-down list, including v1, v2c,
and usm.
Select the security name from the drop-down list.
Input the group name.
Figure 4-34
Views
Figure 4-35
Add a new view
Table 4-9 Views parameter
Description
Input the view name.
Advanced Settings 26