Dahua PFS4218-16GT-190 Web Config Manual page 31

Parameter
Trap Inform Mode
Trap Inform Timeout
Trap Inform Retry Times
Trap Security Engine ID
Trap Security Name
Step 4 Click Save.
Communities
Add the community, and set the authority for NMS accessing Agent, using the community.
Step 1 Select Advanced > Configuration > Security > SNMP > Communities.
Communities interface is displayed. See Figure 4-28.
Step 2 Click Add New Entry.
A new record is added. See Figure 4-29.
Step 3 Set the community name, community secret, source IP, and the source Prefix.
Step 4 Click Save.
Users
Before configuring the SNMP user, you need to configure the SNMP group the user belongs to.
Step 1 Select Advanced > Configuration > Security > SNMP > Users.
The Users interface is displayed. See Figure 4-30.
Description
Select Enabled or Disabled to enable or disable the function. Only
versions of SNMP v2c and SNMP v3 support the function.
Input the timeout. Only versions of SNMP v2c and SNMP v3
support the function.
Input the retry times. Only versions of SNMP v2c and SNMP v3
support the function.
Set the engine ID. Only version SNMP v3 supports the function.
Input the Trap security name. Only version SNMP v3 supports the
function.
Figure 4-28 Communities (1)
Figure 4-29 Communities (2)
Figure 4-30 Users
Advanced Settings 24