Dahua PFS4218-16GT-190 Web Config Manual page 32

Step 2 Click Add New Entry.
A new record is added. See Figure 4-31.
Step 3 Set the parameters. See Table 4-7.
Parameter
Engine ID
User Name
Security Level
Step 4 Click Save.
Groups
After SNMP group configured, you can add the SNMP user to the SNMP group when
configuring SNMP user. You can manage the users in the group better through managing the
group.
Step 1 Select Advanced > Configuration > Security > SNMP > Groups.
The Groups interface is displayed. See Figure 4-32.
Step 2 Click Add New Entry.
A new record is added. See Figure 4-33.
Figure 4-31 Add a user.
Table 4-7 User parameter
Description
It is created automatically.
Input the user name.
Select the security level from the drop-down list.
If you select "Auth, Priv", you need to set the Authentication

Protocol and the Authentication Password, Private Protocol
and the Private Password.
If you select "NoAuth, NoPriv", you do not need to set the

protocol and password.
If you select "Auth, NoPriv", you need to set the

Authentication Protocol and the Authentication Password.
Figure 4-32 Groups
Advanced Settings 25