Step 2
Set the parameters including Timeout, Retransmit, Deadtime, and so on in Global
Configuration.
Step 3
Click Add New Server in Server Configuration.
A new record is added. See Figure 4-57.
Step 4
Set the parameters including Hostname, Timeout, Retransmit, and so on.
Step 5
Click Save.
4.1.4.10 Loop Protection
Step 1
Select Advanced > Configuration > Security > Loop Protection.
The Loop Protection interface is displayed. See Figure 4-58.
Figure 4-56
Radius
Figure 4-57
Server configuration
Advanced Settings 40