Step 3
Input the VLAN ID in Source VLAN(s) Configuration.
Step 4
Configure the Source and the Destination in Port Configuration.
Step 5
Click Save.
4.1.13 Serial Config
Set the conversion between the asynchronous serial port and the Ethernet.
Select Advanced > Configuration > Serial Config. The Serial Config interface is displayed.
See Figure 4-78.
4.2
Monitor
4.2.1 System
4.2.1.1 Information
You can view the system information of the device, including system, hardware, time, and
software.
Select Advanced > Monitor > System > Information. The System Information interface is
displayed. See Figure 4-79.
4.2.1.2 CPU Load
You can view the CPU load within the unit interval. The lines of three different colors stand for
the CPU load rate in different time intervals.
Figure 4-78
Serial Config
Figure 4-79
Information
Advanced Settings 58