Dahua PFS4218-16GT-190 Web Config Manual page 60

Step 1 Select Advanced > Configuration > LLDP > LLDP-MED.
The LLDP-MED Configuration interface is displayed. See Figure 4-71.
Step 2 Set the Fast Start Repeat Count.
Step 3 Set the Transmit TLVs and the Device Type in LLDP-MED Interface Configuration.
Step 4 Set the location information in Coordinates Location.
Step 5 Set the parameters including Country code, State, Country, City, City district, and so on
in Civic Address Location.
Step 6 Add the ermergency phone number in Emergency Call Service.
Step 7 Click Add New Policy.
A new record is added. See Figure 4-72.
Figure 4-71 LLDP-MED configuration
Advanced Settings 53