Dahua PFS4218-16GT-190 Web Config Manual page 24

Parameter
Type
IP
Subnet Mask
Lease Time
Domain Name
Broadcast Address
Default Router
DNS Server
NTP Server
6) Click Save.
Step 3 Configure the mode.
1) Click Mode tab.
The Mode interface is displayed. See Figure 4-14.
2) Select the Mode as Enabled to enable DHCP Server.
3) Click Add VLAN Range.
A new record is added. See Figure 4-15.
4) Input the VLAN range. For example, 2-4.
5) Click Save.
Step 4 Configure the host IP address and the IP address segment.
1) Click Exclude IP tab.
Excluded IP interface is displayed. See Figure 4-16.
Description
Two types: network and host.
Network: a segment of IP address.

Host: a specific IP address.

Input the IP address of the host or the network.
Input the subnet mask.
Input the lease time of the address pool.
Configure the domain name.
Configure the broadcast address.
Configure the default gateway of the address pool.
Configure the server IP address of the domain name
system.
Configure the NTP server IP address.
Figure 4-14
Figure 4-15 Add VLAN range
Mode
Advanced Settings 17