Dahua PFS4218-16GT-190 Web Config Manual page 49

Static
Step 1 Select Advanced > Configuration > Aggregation > Static.
The Statics interface is displayed. See Figure 4-59.
Step 2 Select the Hash Code Contributors in Aggregation Mode Configuration. There are four
types:
 Source MAC Address: the aggregation load balancing algorithm based on MAC
address.
 Destination MAC Address: the aggregation load balancing algorithm based on
destination MAC address.
 IP Address: the aggregation load balancing algorithm based on source IPv4
address and destination IPv4 address.
TCP/UDP Port Number: the aggregation load balancing algorithm based on

source and destination TCP/UDP port.
Step 3 Add the port member to the aggregation group in Aggregation Group Configuration. For
example, add port 1 and port 2 to Static Group 1. See Figure 4-60.
Up to 13 static groups can be set at the same time.
Figure 4-59 Static configuration (1)
Advanced Settings 42