Dahua PFS4218-16GT-190 Web Config Manual page 19

4.1.1.5 Log
You can configure the system log information, including Server Mode, Server Address, and
System Log Level.
Step 1 Select Advanced > Configuration > System > Log.
The System Log Configuration interface is displayed. See Figure 4-8.
Step 2 Set the parameters. See Table 4-3.
Parameter
Server Mode
Figure 4-7 Time settings
Figure 4-8 System log configuration
Table 4-3 System log configuration
Description
Select the server mode: Disabled or Enabled.
Advanced Settings 12