Verifying The Rxe Management Port Cabling; Verifying The Remote Supervisor Adapter Cabling - IBM E Server 440 x Series Configuration Supplemental Information

Verifying the RXE Management port cabling

Use the following illustration and table to verify that your RXE Management cables
are properly connected.
Primary server
Secondary server

Verifying the Remote Supervisor Adapter cabling

See the User's Guide on the IBM Documentation CD for detailed information about
the Remote Supervisor Adapter.
Note: The Remote Supervisor Adapter must connect to an Enterprise Network
when two servers are connected in a 16-way configuration. You can alternatively
connect the Remote Supervisor Adapters to each other with an Ethernet crossover
cable.
18
xSeries 440: 16-way Configuration Supplemental Information
RXE Management B (in) Port
b
1
1 2 3
0
b
3
1 2 3
2
Table 4. RXE Management cable connections
From
Server
Primary
Secondary
RXE Management A (in) Port
a
RXE Expansion Port A
a
RXE Expansion Port B
To
RXE Management Port
A (in)
B (in)