Chapter 11, Protocol Logging
Hardware and Software Requirements
Software Requirements
336
The computer must have a communications software package installed that is
capable of the following:
•
Handling a null modem serial connection
•
Supporting a baud rate of 115 kbps
•
Emulating a VT 100 terminal.
The following communications packages have been tested and verified to work
for protocol logging:
•
PROCOMM PLUS version 2.01 for MS-DOS from Datastorm Technologies, Inc. run-
ning with MS-DOS version 2.0 or later (Hewlett-Packard recommends MS-DOS ver-
sion 6.22).
•
HyperTerminal (comes with Windows 95). Hewlett-Packard recommends a 486 66
MHz class microprocessor and 16 MBytes of RAM for Windows 95.
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amproto.fb