Reinstalling The System Software - HP 86037B Instruction Manual

Maintenance

Reinstalling the System Software

Reinstalling the System Software
This section shows you how to reinstall the chromatic dispersion, National
Instruments 488, and remote shell software. The DAC02 and National Instru-
ments 488 software must be installed in order to run the HP 86037B. The
remote shell software must be installed in order to run the HP 86037B in
remote mode. The files necessary to install the chromatic dispersion software,
NI-488 code, and remote shell service are in the subdirectory named
Related Instructions located under the main install directory. The file and direc-
tory structure is listed below:
\DAC02
\NI-488
\RSH
To install the NI-488 code
1 Run the file setup.exe from the disk1 directory
2 Click custom installation from the setup program
3 Click only the driver option. After the installation is finished, run the GPIB utility
which is found as the GPIB icon in the control panel. When the GPIB utility
window is displayed, select OK. When the next window is displayed, select Yes
To install the DAC02 code
1 Run the file Port95NT.exe from the DAC02 directory and click Yes at the prompt
5-16
Port95NT.exe
version.txt
\disk1
. . .
setup.exe
. . .
\disk2
. . .
rsh_start.bat
rshsetup.exe
rshsvc.dll
rshsvc.exe
rshsvc.txt – Instructions for installation