Press And Release The Shift Key And Then Press; The Tests Key To Display The Configure - HP 8924C Application Manual

Chapter 1, Calibrating the Test Set
Determining RF Path Loss
2. Configure the Test Set for RF loopback.
Manual Operation:

1. Press and release the SHIFT key and then press

the TESTS key to display the CONFIGURE

screen.
2. Position the cursor at the Output Port field.
3. Select Dupl (if no PCS Interface is configured)
or only (if a PCS Interface is configured) by
pressing the knob to toggle the underlined
selection.
Skip steps 4 and 5 if a PCS Interface is configured
4. Position the cursor at the Input Port field.
5. Select RF In if it isn't already selected.
46
NO PCS INTERFACE
CONFIGURE
PCS INTERFACE CONFIGURED
CONFIGURE
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amcal.fb
Output Port
RF Out/Dupl
Input Port
RF In/Ant
Output Port
RF Out/Only