HP 8924C Application Manual page 155

1. Make a Service Option 2 call.
See
is performed with the Test Set.
After setting up the call, return to this procedure.
NOTE: The RF path loss between the RF ouptut of the Test Set and the RF input of the MSUT must
be corrected. Correcting for path loss by entering an RF level offset allows the Test Set
analyzer's auto-ranging algorithm is to work correctly throughout the operating range of
the MSUT. Refer to
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amtxtst.fb
"Setting up a Call" on page 52
"Correct for RF Path Loss." on page
Chapter 4, CDMA Transmitter Tests
Measuring Maximum RF Output Power
if you are not familiar with how this procedure
54.
155