Performance Characteristics
Advanced Functions
Advanced Functions
Automatic measurements (measurements are continuously updated)
Voltage Vavg, Vrms, Vp-p, Vtop, Vbase, Vmin, Vmax
Time Frequency, period, + width, – width, duty cycle, rise time, and
fall time
Cursor Measurements Four cursors can be positioned on the display to
make time voltage measurements. The cursors will track changes in
position and delay controls. Readout in V, T.
Setup functions
Autoscale Sets vertical and horizontal deflections and trigger level.
Requires a signal with a frequency >49 Hz, duty cycle >0.5% and voltage
level : channels 1 and 2 > 20 mVp-p,
Save/Recall 16 front-panel setups can be stored and recalled from
nonvolatile memory.
Trace memory Two volatile pixel memories allow storage of
multi-valued waveforms.
Power Requirements
Line voltage range 100 Vac to 240 Vac
Line voltage selection Automatic
Line frequency 45 Hz to 440 Hz
Maximum power consumption 300 VA
5-8