Chapter 9, 264 Using the Analog Call Processing Subsystem
Using the CALL BIT Screen
Using the CALL BIT Screen
Selecting The Message Content Generation Method
308
The contents (i.e. bit patterns) of the signaling messages sent to the mobile station
on the forward control channel and the forward voice channel are generated using
one of two methods. Method 1 uses the formats defined in the applicable industry
standard to build the contents of the signaling messages. Method 2 uses the bit
patterns which the user defines on the CALL BIT screen to build the contents of
the signaling messages.
The
field on the CALL BIT screen determines which method will be
Data Spec
used to build the contents of the signaling messages.
-The Test Set will use
•
Std
industry standard to build the forward control channel and forward voice
channel signaling messages. The Test Set will use
applicable fields on the CALL CONTROL screen and the CALL
CONFIGURE screen to obtain information necessary to build the
messages. Whenever a signaling message is used, the Test Set will
update the contents of all fields in that message on the CALL BIT screen.
-Use the bit patterns as set on the CALL BIT screen to build all
•
Bits
forward control channel and forward voice channel signaling messages. For any
call processing function (that is, setting the message stream on the active
control channel, registering the mobile station, paging the mobile station,
handing off the mobile station or releasing the mobile station) the user is
responsible for setting the contents of all signaling messages used in that
function. The Call Processing Subsystem uses the messaging protocol as
defined in the applicable industry standard.
the signaling formats defined in the applicable
the contents of the
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amcproc.fb