HP 8924C Application Manual page 151

1. Set up a call
See
is performed with the Test Set.
After setting up the call, return to this procedure.
NOTE: The RF path loss between the RF ouptut of the Test Set and the RF input of the MSUT must
be entered into the Test Set. Correcting for path loss by entering an RF level offset allows
the Test Set analyzer's auto-ranging algorithm is to work correctly throughout the
operating range of the MSUT. Refer to
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amtxtst.fb
"Setting up a Call" on page 52
Chapter 4, CDMA Transmitter Tests
Measuring Minimum/Maximum Power
if you are not familiar with how this procedure
"Correct for RF Path Loss." on page 54.
151