Measuring Waveform Quality
The Test Set measures waveform quality using the correlated power method
recommended in TIA/EIA IS-95. When a waveform quality measurement is
made, the following measurements will be available:
•
•
•
•
•
•
NOTE:
The following procedure assumes that an instrument PRESET will be performed as part of
setting up a call. This clears all settings from other tests that may affect the accuracy of this
test, and allows the procedure to begin from a known instrument state.
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amtxtst.fb
Rho (waveform quality)
Frequency Error
Phase Error
Amplitude Error
Time Offset
Carrier Feedthrough
Chapter 4, CDMA Transmitter Tests
Measuring Waveform Quality
141